Car Diagnostic Pro (OBD2 + Enhanced)

Car Diagnostic Pro is a complete OBD2 package data for all of the OBD2 compliant vehicles. It is equipped with Enhanced Diagnostic Data for your GM, Ford, Toyota, KIA and Nissan. One of the most powerful and comprehensive scan tool app in the Android Market! This app is specialized for Ford and Nissan which is fully equipped with Enhanced Data and Active Test just like the factory scan tool!

The application will communicate with the vehicle computers at the 16 Pin OBD2 Diagnostic Connector. Most of the OBD2 Connector location should be under the Steering Wheel Compartment. Elm 327 or STN Bluetooth device is required to make this application work. Car Diagnostic Pro not only can be exciting with Dashboards, it is a Professional Scan Tool. Do you have a check engine light on? Do you want to know the Readiness Status will pass for a Smog Inspection? Do you want to check the functionality of the sensors and determine the status of the Mode 5/6 Emission On-board Test? Car Diagnostic Pro will show you.

[OBD2 Functions]

All of the Vehicles

✮ Mode 1 - Data Parameters with 220 PIDS

✮ Mode 2 - Freeze Frame Data

✮ Mode 3 - Check Current Faults

✮ Mode 4 - Clear Faults

✮ Mode 5 - O2 Sensor Test Result

✮ Mode 6 - Emission On-board Test Result

✮ Mode 7 - Check Pending Faults

✮ Mode 8 - Enable Evap Test

✮ Mode 9 - Vin, ECU Name, Performance Tracking Data, CALID & etc

✮ Mode A - Check Stored Faults

[Enhanced Functions]

✮ Ford (1996-2013) - Check/Clear Faults, Self Test, KOEO, KOER, and Enhanced Data 2200 PIDS (ISO, PWM, CAN)

✮ Nissan (2001-2007) - Check/Clear Faults, Self Test, Ignition Timing Adjustment, Idle Rpm Adjustment, Active Test and Enhanced Data 634 PIDS (KWP2000 - ECM, TCM, ABS, BCM)

✮ GM (1996-2007) - Check/Clear Faults, Active Test and Enhanced Data 189 PIDS (VPW Powertrain)

✮ Toyota (2000-2006) - Enhanced Data 150 PIDS (ISO - Powertrain) + Read/Clear Faults (KWP2000 Airbag)

✮ KIA (1996-TBD) - Enhanced Data (ISO Powertrain)

✮ Enhanced Functions may not support some models

Please Note:

Some of the Bluetooth Devices are not compatible with the app. App does not support the Mini Elm 327 v2.1!

Please test your device with Elm 327 Checker for compatibilityELM 327 Checker by OBD Scantech

Hardware Requirement:

Elm 327 or STN Bluetooth Adapter.

Vendors: CHX, OBDII, BAFX and OBDLink MX tested OK.

Car Diagnostic Pro是适用于所有OBD2兼容车辆的完整OBD2包装数据。它为您的GM，Ford，Toyota，KIA和Nissan配备了增强型诊断数据。 Android Market中功能最强大，最全面的扫描工具应用之一！这款应用程序专门用于福特和日产，它配备了增强型数据和主动测试，就像工厂扫描工具一样！

该应用程序将与16 Pin OBD2诊断连接器上的车辆计算机进行通信。大多数OBD2连接器位置应位于方向盘舱下方。需要Elm 327或STN蓝牙设备才能使此应用程序正常工作。 Car Diagnostic Pro不仅可以通过Dashboards激动人心，它还是一款专业的扫描工具。你有检查引擎灯吗？您是否想知道准备状态将通过烟雾检查？您想检查传感器的功能并确定Mode 5/6 Emission On-board Test的状态吗？ Car Diagnostic Pro会告诉你。

[OBD2功能]

 所有的车辆

  ✮模式1 - 具有220个PIDS的数据参数

  ✮模式2 - 冻结帧数据

  ✮模式3 - 检查电流故障

  ✮模式4 - 清除故障

  ✮模式5 - O2传感器测试结果

  ✮模式6 - 排放车载测试结果

  ✮模式7 - 检查待定故障

  ✮模式8 - 启用Evap测试

  ✮模式9 - Vin，ECU名称，性能跟踪数据，CALID等

  ✮模式A - 检查存储的故障

[增强功能]

  ✮福特（1996-2013） - 检查/清除故障，自检，KOEO，KOER和增强型数据2200 PIDS（ISO，PWM，CAN）

  ✮日产（2001-2007） - 检查/清除故障，自检，点火正时调整，空闲Rpm调整，主动测试和增强型数据634 PIDS（KWP2000 - ECM，TCM，ABS，BCM）

  ✮GM（1996-2007） - 检查/清除故障，主动测试和增强数据189 PIDS（VPW动力总成）

  ✮丰田（2000-2006） - 增强型数据150 PIDS（ISO - 动力总成）+读取/清除故障（KWP2000安全气囊）

  ✮起亚（1996-TBD） - 增强型数据（ISO动力总成）

✮增强功能可能不支持某些型号

请注意：

某些蓝牙设备与该应用程序不兼容。 App不支持Mini Elm 327 v2.1！

请使用Elm 327 Checker测试您的设备兼容性 OBD Scantech的ELM 327 Checker

硬件要求：

Elm 327或STN蓝牙适配器。

供应商：CHX，OBDII，BAFX和OBDLink MX测试正常。